GI0552 SKX007/SRPD Flat Glass Bezel Insert - Lumed Pepsi Dual Time
- In stock, ready to ship
A glass bezel insert damaged during fitting is not replaced or refunded, so the 31.7mm inner and 38mm outer belong against the bezel of your SKX007 or SRPD mod before the 3M adhesive comes out of its packet. Pepsi is the red-and-blue pairing, and this one is cut across 3 and 9 rather than through the middle, so blue takes the top of the face and red the bottom. What sits under the colour is a 12-hour scale rather than a dive track — numerals 1 to 11 with a triangle between each — so a full turn of the bezel counts half a day, and the markings are lumed so it still reads once the light has gone.
Quick specs
| Outer diameter | 38mm |
| Inner diameter | 31.7mm |
| Material | Glass |
| Design | Flat |
| Colour | Blue and red, split at the 3 and 9 markers |
| Scale | 12-hour dual time, numerals 1 to 11 with a marker between each hour |
| Lume | Lumed |
| Fits | Seiko SKX007, SKX009, SKX011 and rotating bezels of the same measurement |
What's included:
One blue and red Pepsi Dual Time lumed glass bezel insert
One piece of 3M adhesive
Recommended pairing: G1161 SKX007/SRPD Flat Sapphire – For Flat Insert. Alternatives:
SG004 SKX007/SRPD Double Sapphire Crystal for Flat Insert
G0376 SKX007/SRPD Type 2 Double Dome Sapphire Crystal
SG005 SKX007/SRPD Flat Sapphire Crystal
SG006 SKX007/SRPD Flat Sapphire Crystal
Compatibility: Please check the glass insert measurements (31.7mm inner / 38mm outer, flat) against your bezel before ordering.
Note: Package only includes the Lumed Pepsi Dual Time Glass Bezel Insert and 1pc 3M adhesive. Other items in the photos are sold separately. Please note that the insert is printed and can be damaged by prolonged soaking in water. Once installed, removing the insert from the bezel is not possible as it will damage the print. We will not refund or replace any damaged insert after installation.
