GI0596 SKX007/SRPD Flat Glass Bezel Insert - Lumed SKX Style White
- In stock, ready to ship
This is a one-part change and a one-time one — the dial, hands and crystal of your SKX007 or SRPD mod all stay exactly where they are, but the 3M adhesive means the glass bezel insert goes down once, so measure 31.7mm inner and 38mm outer first. On every other insert in this range the lume sits in the markings; here it is the ground. The whole face is the compound, with the 60-minute dive scale printed on top of it in black. So it inverts once the light goes: instead of a scale glowing out of a dark face, the face itself glows green and the numerals read as dark shapes against it.
Quick specs
| Outer diameter | 38mm |
| Inner diameter | 31.7mm |
| Material | Glass |
| Design | Flat |
| Colour | White face with black markings |
| Scale | 60-minute dive track, numerals at each ten, marked at every minute |
| Lume | Green lume across the full face |
| Fits | Seiko SKX007, SKX009, SKX011 and rotating bezels of the same measurement |
What's included:
One white SKX Style lumed glass bezel insert
One piece of 3M adhesive
Recommended pairing: G1161 SKX007/SRPD Flat Sapphire – For Flat Insert. Alternatives:
SG004 SKX007/SRPD Double Sapphire Crystal for Flat Insert
G0376 SKX007/SRPD Type 2 Double Dome Sapphire Crystal
SG005 SKX007/SRPD Flat Sapphire Crystal
SG006 SKX007/SRPD Flat Sapphire Crystal
Compatibility: Please check the glass insert measurements (31.7mm inner / 38mm outer, flat) against your bezel before ordering.
Note: Package only includes the Lumed SKX Style White Glass Bezel Insert and 1pc 3M adhesive. Other items in the photos are sold separately. Please note that the insert is printed and can be damaged by prolonged soaking in water. Once installed, removing the insert from the bezel is not possible as it will damage the print. We will not refund or replace any damaged insert after installation.
