GI0597 SKX007/SRPD Flat Glass Bezel Insert - Lumed Coke SKX Style
- In stock, ready to ship
Check the bezel on your SKX007 mod against the 31.7mm inner and 38mm outer before you order — this glass bezel insert bonds down on the 3M adhesive in the box, and the print won't survive being lifted once it's seated. Coke is the black-and-red pairing, and on this one the red covers the first twenty minutes rather than splitting the face in half, so a glance tells you whether you're still inside the first third of the hour. The numerals, the batons and the dot at every minute are all printed in lume, so the whole track comes back green in the dark while the face stays dark behind it.
Quick specs
| Outer diameter | 38mm |
| Inner diameter | 31.7mm |
| Material | Glass |
| Design | Flat |
| Colour | Black, with red across the first twenty minutes |
| Scale | 60-minute dive track, numerals at each ten, a baton at each five and a dot at every minute |
| Lume | Lumed markings, green |
| Fits | Seiko SKX007, SKX009, SKX011 and rotating bezels of the same measurement |
What's included:
- One black and red Coke SKX style glass bezel insert
- One piece of 3M adhesive
Recommended pairing: G1161 SKX007/SRPD Flat Sapphire - For Flat Insert. Alternatives:
SG004 SKX007/SRPD Double Sapphire Crystal for Flat Insert
G0376 SKX007/SRPD Type 2 Double Dome Sapphire Crystal
SG005 SKX007/SRPD Flat Sapphire Crystal
SG006 SKX007/SRPD Flat Sapphire Crystal
Compatibility: Please check the glass insert measurements (31.7mm inner / 38mm outer, flat) against your bezel before ordering.
Note: Package only includes the Lumed Coke SKX Style Glass Bezel Insert and 1pc 3M adhesive. Other items in the photos are sold separately. Please note that the insert is printed and can be damaged by prolonged soaking in water. Once installed, removing the insert from the bezel is not possible as it will damage the print. We will not refund or replace any damaged insert after installation.
