GI0571 SKX007/SRPD Flat Glass Bezel Insert - Lumed Pepsi SKX Style
- In stock, ready to ship
Order of operations decides this one — measure, then order, then glue — because the 3M adhesive gives the glass bezel insert one seating, and 31.7mm inner and 38mm outer are what the bezel on your SKX007 or SRPD mod has to measure. This is the SKX dive track rather than a 12-hour scale: every minute marked, a numeral at each ten, and the count reading round to 60. Twenty minutes of red against forty of blue is the SKX's own proportion rather than an even split, and the green lume runs across both halves.
Quick specs
| Outer diameter | 38mm |
| Inner diameter | 31.7mm |
| Material | Glass |
| Design | Flat |
| Colour | Red over the first 20 minutes, blue for the remaining 40 |
| Scale | 60-minute dive track, numerals at each ten, marked at every minute |
| Lume | Green lume |
| Fits | Seiko SKX007, SKX009, SKX011 and rotating bezels of the same measurement |
What's included:
One blue and red Pepsi SKX Style lumed glass bezel insert
One piece of 3M adhesive
Recommended pairing: G1161 SKX007/SRPD Flat Sapphire – For Flat Insert. Alternatives:
SG004 SKX007/SRPD Double Sapphire Crystal for Flat Insert
G0376 SKX007/SRPD Type 2 Double Dome Sapphire Crystal
SG005 SKX007/SRPD Flat Sapphire Crystal
SG006 SKX007/SRPD Flat Sapphire Crystal
Compatibility: Please check the glass insert measurements (31.7mm inner / 38mm outer, flat) against your bezel before ordering.
Note: Package only includes the Lumed Pepsi SKX Style Glass Bezel Insert and 1pc 3M adhesive. Other items in the photos are sold separately. Please note that the insert is printed and can be damaged by prolonged soaking in water. Once installed, removing the insert from the bezel is not possible as it will damage the print. We will not refund or replace any damaged insert after installation.
