GI0788 SKX007/SRPD Flat Glass Bezel Insert - Lumed Orange/Gray
- In stock, ready to ship
At 38mm outer and 31.7mm inner this is the SKX007 size rather than the smaller SKX013 one, worth confirming against your own Seiko mod because the 3M adhesive does not give the insert back. Orange over the first twenty minutes against a gray remainder is the loudest way this range marks that opening stretch, and you can pick the marker out at arm's length in poor light, which is the entire point of a dive track you actually use. Everything printed on this glass bezel insert is lume and neither the gray nor the orange is, so the dark leaves you the scale on its own.
Quick specs
| Outer diameter | 38mm |
| Inner diameter | 31.7mm |
| Material | Glass |
| Design | Flat |
| Colour | Gray, with orange across the first twenty minutes |
| Scale | 60-minute dive track, numerals at each ten, a baton at each five and a dot at every minute |
| Lume | Lumed markings, green |
| Fits | Seiko SKX007, SKX009, SKX011 and rotating bezels of the same measurement |
What's included:
- One orange and gray lumed glass bezel insert
- One piece of 3M adhesive
Recommended pairing: G1161 SKX007/SRPD Flat Sapphire - For Flat Insert. Alternatives:
SG004 SKX007/SRPD Double Sapphire Crystal for Flat Insert
G0376 SKX007/SRPD Type 2 Double Dome Sapphire Crystal
SG005 SKX007/SRPD Flat Sapphire Crystal
SG006 SKX007/SRPD Flat Sapphire Crystal
Compatibility: Please check the glass insert measurements (31.7mm inner / 38mm outer, flat) against your bezel before ordering.
Note: Package only includes the Lumed Orange/Gray Glass Bezel Insert and 1pc 3M adhesive. Other items in the photos are sold separately. Please note that the insert is printed and can be damaged by prolonged soaking in water. Once installed, removing the insert from the bezel is not possible as it will damage the print. We will not refund or replace any damaged insert after installation.
