GI0789 SKX007/SRPD Flat Glass Bezel Insert - Lumed Black/White
- In stock, ready to ship
Swapping the insert is the whole job on an SKX007 or SRPD mod, with nothing under the crystal disturbed — but the 3M adhesive makes it a one-way fit, so measure 31.7mm inside and 38mm outside first. The face is divided at the 15 and 45 marks into a black half and a white one, with the markings swapping colour across the join so they stay readable on both sides. The white half isn't paint but lume, so in the dark that side of the glass bezel insert lights as a solid block while the black side shows only its numerals and batons — which is a different thing to look at entirely from the rest of this range.
Quick specs
| Outer diameter | 38mm |
| Inner diameter | 31.7mm |
| Material | Glass |
| Design | Flat |
| Colour | Black and white, split at the 15 and 45 marks |
| Scale | 60-minute dive track, numerals at each ten, a baton at each five and a dot at every minute |
| Lume | Lumed markings, green; the white half is lume across its full area |
| Fits | Seiko SKX007, SKX009, SKX011, Seiko SRPD models and rotating bezels of the same measurement |
What's included:
- One black and white lumed SKX style glass bezel insert
- One piece of 3M adhesive
Recommended pairing: G1161 SKX007/SRPD Flat Sapphire - For Flat Insert. Alternatives:
SG004 SKX007/SRPD Double Sapphire Crystal for Flat Insert
G0376 SKX007/SRPD Type 2 Double Dome Sapphire Crystal
SG005 SKX007/SRPD Flat Sapphire Crystal
SG006 SKX007/SRPD Flat Sapphire Crystal
Compatibility: Please check the glass insert measurements (31.7mm inner / 38mm outer, flat) against your bezel before ordering.
Note: Package only includes the Lumed Black/White Glass Bezel Insert and 1pc 3M adhesive. Other items in the photos are sold separately. Please note that the insert is printed and can be damaged by prolonged soaking in water. Once installed, removing the insert from the bezel is not possible as it will damage the print. We will not refund or replace any damaged insert after installation.
