GI0862 SKX007/SRPD Flat Glass Bezel Insert - Lumed Orange
- In stock, ready to ship
Your SKX007 or SRPD mod keeps everything but the insert, and at 31.7mm inner and 38mm outer that glass bezel insert has to be right first time, because the adhesive bond is final and the print does not survive being parted from it. It drops the dive scale completely: twelve blocks alternate orange and cream around the bezel, each one carrying a multiply, plus, minus or divide sign, and the four signs repeat three times to fill the circle. The cream blocks are lume rather than paint, so after dark the insert reads as six glowing panels with the orange ones dark between them — which is not something any other insert in the range does.
Quick specs
| Outer diameter | 38mm |
| Inner diameter | 31.7mm |
| Material | Glass |
| Design | Flat |
| Colour | Orange and cream |
| Scale | No timing scale — twelve alternating blocks carrying multiply, plus, minus and divide signs, repeating three times |
| Lume | Lumed; the cream blocks are lume across their full area |
| Fits | Seiko SKX007, SKX009, SKX011, Seiko SRPD models and rotating bezels of the same measurement |
What's included:
- One orange and cream symbol glass bezel insert
- One piece of 3M adhesive
Recommended pairing: G1161 SKX007/SRPD Flat Sapphire - For Flat Insert. Alternatives:
SG004 SKX007/SRPD Double Sapphire Crystal for Flat Insert
G0376 SKX007/SRPD Type 2 Double Dome Sapphire Crystal
SG005 SKX007/SRPD Flat Sapphire Crystal
SG006 SKX007/SRPD Flat Sapphire Crystal
Compatibility: Please check the glass insert measurements (31.7mm inner / 38mm outer, flat) against your bezel before ordering.
Note: Package only includes the Lumed Orange Glass Bezel Insert and 1pc 3M adhesive. Other items in the photos are sold separately. Please note that the insert is printed and can be damaged by prolonged soaking in water. Once installed, removing the insert from the bezel is not possible as it will damage the print. We will not refund or replace any damaged insert after installation.
