GI0863 SKX007/SRPD Flat Glass Bezel Insert - Dark Blue
- In stock, ready to ship
Nothing under the crystal is touched when this goes onto an SKX007 or SRPD mod, but it is a single-attempt job — the adhesive is permanent — so confirm the 31.7mm inner against your bezel before ordering. Dark blue against white is the sharpest of the three symbol bezel inserts, because the join between each pair of blocks is a hard edge rather than a shade change, and the multiply, plus, minus and divide signs sit reversed out of whichever block they fall on. The white blocks are lume through their whole depth, so what you get at night is a ring of six lit panels rather than a scale.
Quick specs
| Outer diameter | 38mm |
| Inner diameter | 31.7mm |
| Material | Glass |
| Design | Flat |
| Colour | Dark blue and white |
| Scale | No timing scale — twelve alternating blocks carrying multiply, plus, minus and divide signs, repeating three times |
| Lume | Lumed; the white blocks are lume across their full area |
| Fits | Seiko SKX007, SKX009, SKX011, Seiko SRPD models and rotating bezels of the same measurement |
What's included:
- One dark blue and white symbol glass bezel insert
- One piece of 3M adhesive
Recommended pairing: G1161 SKX007/SRPD Flat Sapphire - For Flat Insert. Alternatives:
SG004 SKX007/SRPD Double Sapphire Crystal for Flat Insert
G0376 SKX007/SRPD Type 2 Double Dome Sapphire Crystal
SG005 SKX007/SRPD Flat Sapphire Crystal
SG006 SKX007/SRPD Flat Sapphire Crystal
Compatibility: Please check the glass insert measurements (31.7mm inner / 38mm outer, flat) against your bezel before ordering.
Note: Package only includes the Dark Blue Glass Bezel Insert and 1pc 3M adhesive. Other items in the photos are sold separately. Please note that the insert is printed and can be damaged by prolonged soaking in water. Once installed, removing the insert from the bezel is not possible as it will damage the print. We will not refund or replace any damaged insert after installation.
