GI0941 SKX007/SRPD Flat Glass Bezel Insert - Lumed Blue PO Style
- In stock, ready to ship
The print on this one lifts with the insert, which is why the adhesive supplied should be treated as final — take 31.7mm inside and 38mm outside to the bezel on your SRPD or SKX007 mod before ordering. Blue is the version of the PO layout that takes the edge off it: the graduated first fifteen still does all the work, but the face reads closer to a dress diver than the black one manages. The scale on this glass bezel insert is lumed throughout, and it's the crowded graduations at the top that come back brightest.
Quick specs
| Outer diameter | 38mm |
| Inner diameter | 31.7mm |
| Material | Glass |
| Design | Flat |
| Colour | Blue |
| Scale | PO style — graduated at every minute across the first fifteen, batons at each five thereafter, numerals from 20 |
| Lume | Lumed markings, green |
| Fits | Seiko SKX007, SKX009, SKX011, Seiko SRPD models and rotating bezels of the same measurement |
What's included:
- One blue PO style lumed glass bezel insert
- One piece of 3M adhesive
Recommended pairing: G1161 SKX007/SRPD Flat Sapphire - For Flat Insert. Alternatives:
SG004 SKX007/SRPD Double Sapphire Crystal for Flat Insert
G0376 SKX007/SRPD Type 2 Double Dome Sapphire Crystal
SG005 SKX007/SRPD Flat Sapphire Crystal
SG006 SKX007/SRPD Flat Sapphire Crystal
Compatibility: Please check the glass insert measurements (31.7mm inner / 38mm outer, flat) against your bezel before ordering.
Note: Package only includes the Lumed Blue PO Style Glass Bezel Insert and 1pc 3M adhesive. Other items in the photos are sold separately. Please note that the insert is printed and can be damaged by prolonged soaking in water. Once installed, removing the insert from the bezel is not possible as it will damage the print. We will not refund or replace any damaged insert after installation.
