GI0943 SKX007/SRPD Flat Glass Bezel Insert - Lumed Green SKX Style
- In stock, ready to ship
Two things to settle before this goes onto an SKX007 or SRPD mod: the adhesive fit at 31.7mm inner and 38mm outer is permanent, and the printed face will not take prolonged soaking. Where the PO inserts crowd their graduations into the first fifteen minutes, this SKX layout marks every minute the whole way round, so it is the one to pick if you time things that run longer than a quarter of an hour. The face of this glass bezel insert is green, the markings are lumed, and the dot at each minute comes back with the rest of the track after dark.
Quick specs
| Outer diameter | 38mm |
| Inner diameter | 31.7mm |
| Material | Glass |
| Design | Flat |
| Colour | Green |
| Scale | 60-minute dive track, numerals at each ten, a baton at each five and a dot at every minute |
| Lume | Lumed markings, green |
| Fits | Seiko SKX007, SKX009, SKX011, Seiko SRPD models and rotating bezels of the same measurement |
What's included:
- One green SKX style lumed glass bezel insert
- One piece of 3M adhesive
Recommended pairing: G1161 SKX007/SRPD Flat Sapphire - For Flat Insert. Alternatives:
SG004 SKX007/SRPD Double Sapphire Crystal for Flat Insert
G0376 SKX007/SRPD Type 2 Double Dome Sapphire Crystal
SG005 SKX007/SRPD Flat Sapphire Crystal
SG006 SKX007/SRPD Flat Sapphire Crystal
Compatibility: Please check the glass insert measurements (31.7mm inner / 38mm outer, flat) against your bezel before ordering.
Note: Package only includes the Lumed Green SKX Style Glass Bezel Insert and 1pc 3M adhesive. Other items in the photos are sold separately. Please note that the insert is printed and can be damaged by prolonged soaking in water. Once installed, removing the insert from the bezel is not possible as it will damage the print. We will not refund or replace any damaged insert after installation.
