GI004 SKX007/SRPD Flat Glass Bezel Insert -Lumed GMT Black/Red
- In stock, ready to ship
- Inventory on the way
Measure your bezel against the 31.7mm inner and 38mm outer before ordering — the insert is printed and bonds in permanently, so it isn't a part you can fit and then take back off. Black and red is the classic GMT pairing, and this is the printed-glass version of it: the triangle, the numerals and the markers all glow, not just the marker at 12. C3 gives it a green glow and BGW9 a blue one, and the red half sits over the daylight hours either way.
Quick specs
| Outer diameter | 38mm |
| Inner diameter | 31.7mm |
| Material | Glass |
| Design | Flat |
| Colour | Black and red, split across the 6 and 18 markers |
| Scale | 24-hour GMT, even numerals with a dot at each odd hour |
| Lume | Lumed triangle, numerals and markers — C3 green or BGW9 blue |
| Fits | Seiko SKX007, SKX009, SKX011 and SRPD (5KX) |
What's included:
One black and red lumed GMT glass bezel insert, in your choice of C3 or BGW9 lume
One piece of 3M adhesive
Building an SSK GMT? The page gives the sequence for the SSK001, SSK003, SSK005, SSK017, SSK033 and SSK035:
1. Bezel — replace the rotating bezel with the SSK Rotating Bezel
2. Insert — this one
3. Crystal — see the pairing below
Recommended pairing: G1161 SKX007/SRPD Flat Sapphire – For Flat Insert. Alternatives:
SG004 SKX007/SRPD Double Sapphire Crystal for Flat Insert
SG005 SKX007/SRPD Flat Sapphire Crystal
SG006 SKX007/SRPD Flat Sapphire Crystal
SG008 SKX007/SRPD Double Dome Sapphire Crystal
On a standard SKX/SRPD case, the page also lists SG004 SKX007/SRPD Double Sapphire Crystal for Flat Insert. Alternatives:
G0342 SKX007/SRPD Flat Sapphire Crystal – For NH34 Movement, Clear AR
G0376 SKX007/SRPD Type 2 Double Dome Sapphire Crystal
SG001 SKX007/SRPD Type 1 Double Dome Sapphire Crystal
SG003 SKX007/SRPD Double Sapphire Crystal for Slope Insert
SG007 SKX007/SRPD Double Dome Sapphire Crystal for Slim Bezel
SG008 SKX007/SRPD Double Dome Sapphire Crystal
Compatibility: For Seiko SKX007, SKX009, SKX011 and SRPD (5KX). Please take note of the insert measurements (31.7mm inner / 38mm outer, flat profile) before purchasing.
Note: Package only includes the Lumed GMT Black/Red Glass Bezel Insert and 1pc 3M adhesive. Other items in the photos are sold separately. Please note that the insert is printed and can be damaged by prolonged soaking in water. Once installed, removing the insert from the bezel is not possible as it will damage the print. We will not refund or replace any damaged insert after installation.