GI1206 SKX007/SRPD Flat Glass Bezel Insert - Lumed Blue/White
- In stock, ready to ship
There is no taking this one off again once the adhesive in the box has it, so an SKX007 or SRPD mod wants the 31.7mm inner and 38mm outer checked against its bezel first. The numerals run 1 to 11 with a dot between each, so the bezel reads twelve hours to a turn rather than sixty minutes, and the face divides at the 3 and 9 marks into a blue upper half and a white lower one with the numerals swapping colour across the join. That white half of the glass bezel insert is lume all the way through rather than printed, so at night the bottom of the bezel lights as one solid arc and the blue half shows only its numbers.
Quick specs
| Outer diameter | 38mm |
| Inner diameter | 31.7mm |
| Material | Glass |
| Design | Flat |
| Colour | Blue and white, split at the 3 and 9 marks |
| Scale | 12-hour dual time, numerals 1 to 11 with a marker between each hour |
| Lume | Lumed markings, green; the white half is lume across its full area |
| Fits | Seiko SKX007, SKX009, SKX011 and rotating bezels of the same measurement |
What's included:
- One blue and white dual time glass bezel insert
- One piece of 3M adhesive
Recommended pairing: G1161 SKX007/SRPD Flat Sapphire - For Flat Insert. Alternatives:
SG004 SKX007/SRPD Double Sapphire Crystal for Flat Insert
G0376 SKX007/SRPD Type 2 Double Dome Sapphire Crystal
SG005 SKX007/SRPD Flat Sapphire Crystal
SG006 SKX007/SRPD Flat Sapphire Crystal
Compatibility: Please check the glass insert measurements (31.7mm inner / 38mm outer, flat) against your bezel before ordering.
Note: Package only includes the Lumed Blue/White Glass Bezel Insert and 1pc 3M adhesive. Other items in the photos are sold separately. Please note that the insert is printed and can be damaged by prolonged soaking in water. Once installed, removing the insert from the bezel is not possible as it will damage the print. We will not refund or replace any damaged insert after installation.
