GI001 SKX007/SRPD Flat Glass Bezel Insert - Lumed GMT B. Wayne
- In stock, ready to ship
- Inventory on the way
The glow is the only part of this one you choose — C3 green or BGW9 blue — because the 3M adhesive fixes the glass bezel insert permanently once it is down, so put 31.7mm inner and 38mm outer against the bezel on your SKX007 mod before you order. B. Wayne is the black-and-grey pairing, divided at 6 and 18 so the scale falls into a dark half and a light one the way a 24-hour bezel is meant to. The numerals and the markers are printed to glow rather than the face, so the whole scale returns in the dark instead of a single pip.
Quick specs
| Outer diameter | 38mm |
| Inner diameter | 31.7mm |
| Material | Glass |
| Design | Flat |
| Colour | Black and gray, split at the 6 and 18 markers |
| Scale | 24-hour GMT, even numerals with a dot at each odd hour |
| Lume | Lumed numerals and markers — C3 green or BGW9 blue |
| Fits | Seiko SKX007, SKX009, SKX011 and rotating bezels of the same measurement |
What's included:
One black and gray lumed GMT glass bezel insert, in your choice of C3 or BGW9 lume
One piece of 3M adhesive
Recommended pairing: G1161 SKX007/SRPD Flat Sapphire – For Flat Insert. Alternatives:
SG004 SKX007/SRPD Double Sapphire Crystal for Flat Insert
G0376 SKX007/SRPD Type 2 Double Dome Sapphire Crystal
SG005 SKX007/SRPD Flat Sapphire Crystal
SG006 SKX007/SRPD Flat Sapphire Crystal
On an NH34 GMT movement, the page lists two more: G0342 SKX007/SRPD Flat Sapphire Crystal – For NH34 Movement Clear AR, or SG003 SKX007/SRPD Double Sapphire Crystal for Slope Insert.
Using a slim bezel? The page also points to the Slim Rotating Bezel Design for SKX007/SRPD.
Compatibility: Please check the glass insert measurements (31.7mm inner / 38mm outer, flat) against your bezel before ordering.
Note: Package only includes the Lumed GMT B. Wayne Glass Bezel Insert and 1pc 3M adhesive. Other items in the photos are sold separately. Please note that the insert is printed and can be damaged by prolonged soaking in water. Once installed, removing the insert from the bezel is not possible as it will damage the print. We will not refund or replace any damaged insert after installation.