GI1578 SKX013 Flat Glass Bezel Insert - Lumed Dual Time - Red/White
- In stock, ready to ship
- Inventory on the way
The rotating bezel on your SKX013 mod takes this as it is, so nothing under the crystal is touched — but with an adhesive fit you cannot undo, measure 27.5mm inner and 33.6mm outer before you order. Red across the top and white across the bottom, divided at the 3 and 9 marks, with every numeral reversing colour where the two halves meet — white figures on the red, red figures on the white. This glass bezel insert carries a twelve-hour scale rather than a dive track, so the numerals stop at 11 and one full turn of the bezel covers half a day, and the white half glows as a solid arc after dark.
Quick specs
| Outer diameter | 33.6mm |
| Inner diameter | 27.5mm |
| Material | Glass |
| Design | Flat |
| Colour | Red and white, split at the 3 and 9 marks |
| Scale | 12-hour dual time, numerals 1 to 11 with a marker between each hour |
| Lume | Lumed markings, green; the white half is lume across its full area |
| Fits | Seiko SKX013, the SKX013 replacement case and the SKX013 rotating bezel |
What's included:
- One red and white dual time glass bezel insert for SKX013
Recommended pairing: The page points to its SKX013 Sapphire Crystals collection without naming a particular part.
Compatibility: Please check the glass insert measurements (27.5mm inner / 33.6mm outer, flat) against your bezel before ordering.
Note: Please note that the insert is printed and can be damaged by prolonged soaking in water. Once installed, removing the insert from the bezel is not possible as it will damage the print. We will not refund or replace any damaged insert after installation.