GI1581 SKX013 Flat Glass Bezel Insert - Lumed Dual Time - Dark Blue/White
- In stock, ready to ship
- Inventory on the way
The adhesive supplied bonds this glass bezel insert down permanently, so put the 27.5mm inner against your SKX013 bezel before you order rather than after. This is the SKX013 size of the same dark blue and white dual time sold for the SKX007 as GI1206, so a pair of Seiko mods in the two case sizes can be finished to match. The numerals run 1 to 11 with a dot between each and the face divides at the 3 and 9 marks, and the white lower half is lume across its whole area, so it lights as one piece while the blue half shows only its figures.
Quick specs
| Outer diameter | 33.6mm |
| Inner diameter | 27.5mm |
| Material | Glass |
| Design | Flat |
| Colour | Dark blue and white, split at the 3 and 9 marks |
| Scale | 12-hour dual time, numerals 1 to 11 with a marker between each hour |
| Lume | Lumed markings, green; the white half is lume across its full area |
| Fits | Seiko SKX013, the SKX013 replacement case and the SKX013 rotating bezel |
What's included:
- One dark blue and white dual time glass bezel insert for SKX013
Recommended pairing: The page points to its SKX013 Sapphire Crystals collection without naming a particular part.
Compatibility: Please check the glass insert measurements (27.5mm inner / 33.6mm outer, flat) against your bezel before ordering.
Note: Please note that the insert is printed and can be damaged by prolonged soaking in water. Once installed, removing the insert from the bezel is not possible as it will damage the print. We will not refund or replace any damaged insert after installation.