33.6mm black and white lumed flat glass bezel insert with a 60-minute dive track for Seiko SKX013

GI1628 SKX013 Flat Glass Bezel Insert - Lumed - Black/White

₱2,350.00
/
  • In stock, ready to ship
  • Inventory on the way

Lifting this glass bezel insert off again takes the print with it, so the 27.5mm inner and 33.6mm outer are worth putting against your SKX013 mod bezel before the adhesive is anywhere near it. It is the one insert in the SKX013 glass range that keeps a proper sixty-minute dive track: numerals at every ten, a baton at every five and a dot at every minute, where its neighbours all run twelve-hour scales. Black across the top and white across the bottom, split at the 15 and 45 marks, and the white half is lume rather than paint, so it returns after dark as a solid glowing half.

Quick specs

Outer diameter 33.6mm
Inner diameter 27.5mm
Material Glass
Design Flat
Colour Black and white, split at the 15 and 45 marks
Scale 60-minute dive track, numerals at each ten, a baton at each five and a dot at every minute
Lume Lumed markings, green; the white half is lume across its full area
Fits Seiko SKX013, the SKX013 replacement case and the SKX013 rotating bezel

What's included:

  • One black and white lumed glass bezel insert for SKX013

Recommended pairing: The page points to its SKX013 Sapphire Crystals collection without naming a particular part.

Compatibility: Please check the glass insert measurements (27.5mm inner / 33.6mm outer, flat) against your bezel before ordering.

Note: Please note that the insert is printed and can be damaged by prolonged soaking in water. Once installed, removing the insert from the bezel is not possible as it will damage the print. We will not refund or replace any damaged insert after installation.

Recently viewed