GI1629 SKX013 Flat Glass Bezel Insert - Lumed Pepsi SKX Style
- In stock, ready to ship
- Inventory on the way
The adhesive fit is permanent and the printed face will not take prolonged soaking, so an SKX013 mod wants 27.5mm inner and 33.6mm outer confirmed before the insert goes near the bezel. Pepsi is the red-and-blue pairing, and the red takes the first twenty minutes of the track with blue running the remaining forty, so the colour itself tells you which part of the hour you are timing. This glass bezel insert keeps the full SKX layout underneath — numerals at every ten, a baton at every five, a dot at every minute — and the markings are lumed green against a face that stays dark.
Quick specs
| Outer diameter | 33.6mm |
| Inner diameter | 27.5mm |
| Material | Glass |
| Design | Flat |
| Colour | Blue, with red across the first twenty minutes |
| Scale | 60-minute dive track, numerals at each ten, a baton at each five and a dot at every minute |
| Lume | Lumed markings, green |
| Fits | Seiko SKX013, the SKX013 replacement case and the SKX013 rotating bezel |
What's included:
- One red and blue Pepsi glass bezel insert for SKX013
Recommended pairing: The page points to its SKX013 Sapphire Crystals collection without naming a particular part.
Compatibility: Please check the glass insert measurements (27.5mm inner / 33.6mm outer, flat) against your bezel before ordering.
Note: Please note that the insert is printed and can be damaged by prolonged soaking in water. Once installed, removing the insert from the bezel is not possible as it will damage the print. We will not refund or replace any damaged insert after installation.