CI0007 SKX007/SRPD Pepsi GMT Ceramic Bezel Insert
- In stock, ready to ship
This is the 24-hour track, not the 60-minute one — on an SSK or NH34 GMT build the fourth hand points straight at home time without any arithmetic. The colour change lands on 6 and 18, so the red half covers the daylight hours and the blue half covers the dark ones, and you can tell which one you're looking at from arm's length. It's the standard SKX bezel measurement, so the insert itself is a straight swap and nothing under the bezel is disturbed.
Quick specs
| Outer diameter | 38mm |
| Inner diameter | 31.8mm |
| Material | Ceramic |
| Design | Slope |
| Scale | 24-hour GMT, blue / red |
| Fits | Seiko SKX007 / SKX009 / SKX011 (and other rotating bezels of the same measurement) |
What's included:
One red-and-blue Pepsi GMT ceramic bezel insert
One piece of double-sided adhesive
Building a Pepsi GMT? The page lists the rest of the parts it goes with:
1. Bezel — Coin Edge Bezel (alternative: Sub Bezel)
2. Insert — this one
3. Chapter ring — to match the ring of markers around the dial
4. Hands — including a GMT hand if you're building on an NH34 or SSK movement
5. Crown
6. Crystal — a double dome sapphire, fitted last
Recommended pairing: A double dome sapphire crystal.
Compatibility: Please check the ceramic insert measurements (31.8mm inner / 38mm outer, slope) against your bezel before ordering. The 24-hour scale is read by a GMT hand, so it belongs on a GMT movement build.
Note: Package includes the Pepsi GMT Bezel Insert and 1pc double-sided adhesive. Other items in the photos are sold separately.
