GI0624 SKX007/SRPD Flat Glass Bezel Insert - Dark Blue/Gray
- In stock, ready to ship
There is one attempt at this on an SKX007 or SRPD mod: the 3M adhesive goes down hard and lifting the insert afterwards takes the print with it, so confirm 31.7mm inner and 38mm outer against your bezel. This glass bezel insert runs the same first-twenty-minutes split as a Coke, but in gray against dark blue, which reads as a change of tone rather than a flag and suits a build you want to keep quiet. The markings are lumed and the face is not, so after dark you are left with the scale and nothing else.
Quick specs
| Outer diameter | 38mm |
| Inner diameter | 31.7mm |
| Material | Glass |
| Design | Flat |
| Colour | Dark blue, with gray across the first twenty minutes |
| Scale | 60-minute dive track, numerals at each ten, a baton at each five and a dot at every minute |
| Lume | Lumed markings, green |
| Fits | Seiko SKX007, SKX009, SKX011 and rotating bezels of the same measurement |
What's included:
- One dark blue and gray lumed glass bezel insert
- One piece of 3M adhesive
Recommended pairing: SG004 SKX007/SRPD Double Sapphire Crystal for Flat Insert.
Compatibility: Please check the glass insert measurements (31.7mm inner / 38mm outer, flat) against your bezel before ordering.
Note: Package only includes the Dark Blue/Gray Glass Bezel Insert and 1pc 3M adhesive. Other items in the photos are sold separately. Please note that the insert is printed and can be damaged by prolonged soaking in water. Once installed, removing the insert from the bezel is not possible as it will damage the print. We will not refund or replace any damaged insert after installation.
