GI1205 SKX007/SRPD Flat Glass Bezel Insert - Lumed Coke Dual Time
- In stock, ready to ship
The bezel your SKX007 mod already carries is the only fitting this needs, and the adhesive supplied makes it a one-shot job at 31.7mm inner and 38mm outer. Coke is the black-and-red pairing, but here it sits on a twelve-hour scale instead of a dive track: the numerals run 1 to 11 with a marker between each, so a full turn of the bezel is twelve hours and setting the triangle against the hour hand gives you hours elapsed. On this glass bezel insert the split falls at the 3 and 9 marks rather than through the middle, which puts the whole red half along the bottom of the watch where you see it on the wrist.
Quick specs
| Outer diameter | 38mm |
| Inner diameter | 31.7mm |
| Material | Glass |
| Design | Flat |
| Colour | Black and red, split at the 3 and 9 marks |
| Scale | 12-hour dual time, numerals 1 to 11 with a marker between each hour |
| Lume | Lumed |
| Fits | Seiko SKX007, SKX009, SKX011 and rotating bezels of the same measurement |
What's included:
- One black and red Coke dual time glass bezel insert
- One piece of 3M adhesive
Recommended pairing: G1161 SKX007/SRPD Flat Sapphire - For Flat Insert. Alternatives:
SG004 SKX007/SRPD Double Sapphire Crystal for Flat Insert
G0376 SKX007/SRPD Type 2 Double Dome Sapphire Crystal
SG005 SKX007/SRPD Flat Sapphire Crystal
SG006 SKX007/SRPD Flat Sapphire Crystal
Compatibility: Please check the glass insert measurements (31.7mm inner / 38mm outer, flat) against your bezel before ordering.
Note: Package only includes the Lumed Coke Dual Time Glass Bezel Insert and 1pc 3M adhesive. Other items in the photos are sold separately. Please note that the insert is printed and can be damaged by prolonged soaking in water. Once installed, removing the insert from the bezel is not possible as it will damage the print. We will not refund or replace any damaged insert after installation.
