106 products
Sold Out
Quick view
Sold Out
Quick view
SKX and SRP Turtle Re-issue Rotating Bezels for Seiko Mod
Find the right rotating bezel for your Seiko mod build at Watch&Style. This collection covers the three SKX and Turtle dive platforms — SKX007/SRPD, SKX013, and the SRP Turtle Re-issue — all machined from 316L stainless steel, the marine-grade alloy Seiko uses across its own divers. Whether you are replacing a bezel that has gone dull, changing the grip, or starting from a bare case, this is where you match the bezel to your platform before you choose the insert that drops into it.
Bezel Designs
Coin Edge and Knurled bezels carry the finely ridged outer edge that gives you a grip under a wet thumb, and Sub Style carries the smooth submariner-inspired profile. LX, SM (Seamaster-style), M1, T1000, Crown, Gear and Fugu round out the shaped designs, and slim-profile versions of several sit lower around the crystal. Pilot, GMT and Sterile bezels are marked on the bezel face itself rather than taking a separate insert — Pilot for a clean minimal edge, GMT for a 24-hour scale on an SSK or NH34 GMT build, and Sterile left unmarked, which its product page notes is fixed rather than rotating.
Colors & Finishes
Polished is the most common finish here, alongside sandblasted, brushed and matte black, in plain steel, black, gold, rose gold and blue. The finish is what ties the bezel to the case, so it is usually worth choosing against your case and crown first and the insert second — a sandblasted bezel reads very differently against a polished SKX007 case than a polished one does.
Matching the Bezel to Your Platform
Bezels are sized per platform and are not interchangeable — an SKX007 bezel will not fit an SKX013 or an SRP Turtle Re-issue, and the reverse is just as true. Use the Models filter to narrow to yours, or go straight there: SKX007 and SRPD rotating bezels, SKX013 rotating bezels, or SRP Turtle rotating bezels. Building a Seiko 5 GMT or an SRPE? Those take bezels of their own, which are not on this page — see SSK rotating bezels or the full rotating bezel collection. Pair your bezel with a matching bezel insert, crystal and chapter ring, and browse dials and hands to finish the build.
Frequently Asked Questions
Does the bezel come with the insert?
No — the bezel and the insert are separate parts, and the package note on each product page states exactly what is in the box. Choose the bezel for your platform first, then pick the insert that drops into it from bezel inserts. The Pilot, GMT and Sterile bezels are the exception: they are marked on the bezel face and take no insert at all.
Is the bezel gasket already installed?
On the insert-taking designs, yes. Every Coin Edge, Knurled, Sub Style, LX, M1, SM, T1000, Crown, Gear and Fugu bezel in this collection lists the rotating bezel gasket as installed, so it is not something to source separately. The Pilot, GMT and Sterile bezels do not list one. The product page states it either way.
Will an SKX007 bezel fit my SKX013 or SRP Turtle Re-issue?
No. The SKX013 is the smaller case and the SRP Turtle Re-issue is different again, so each of the three takes its own bezel size. If you are not sure which platform your case is, measure the outer diameter of the bezel already on the watch and check it against the product specs before ordering.
Browse the full SKX and SRP Turtle rotating bezel collection above to find the bezel that frames your next Seiko mod build.